Thursday, April 26, 2012

SOP – Laundry – Tips for using Dryers


Dryer temperature:
  • Set the correct temperature for the dryer as per the linen used.
  • Reduce heat if the synthetics linens are having wrinkles.
  • Reduce heat down during the last few minutes of drying time.
  • Remove linens before they are bone-dry.
  • If the dryer heat is too high then the synthetic fabrics can look glazed or fused fibers.
  • Learn the drying times and temperature for each fabric.
  • Clean the filters on periodic bases to prevent any fire accidents.
Loading dryers:
  • Always follow the manufactures loading instructions.
  • Load the dryer to their capacity, ie do not overload or under load.
  • Load dryers by the optimum performance weight or by the piece count to save energy costs.
  • It is also a good practice to sort linens and uniforms by their type before drying.
  • When drying the pillow cases and bed sheets run them through a cool down cycle of three to five minutes this will help reduce wrinkles.
  • Cool down cycles feature on the dryer can also reduce the chances of burning the fabrics.
Removing linens and uniforms from dryer:
  • While taking the cloths out from the dryer avoid accidental burs from hot dryer surfaces.
  • Do not put the dried cloths from the dryer to the floor.
  • Also never leave linen in the dryers overnight as this may cause fire accidents.

No comments:

Featured post

GUEST CYCLE  4 Stages and Diagram  In the hotel industry, the sequence of service is a structured approach to delivering exceptional guest e...